Daikin FXHQ-A Spezifikationen PDF herunterladen (Seite 22)

EDUS39-600-F5 Installation

FXHQ-M 21

(3-2) Remove the decoration panels (left and right) and the

protection net.

• After removing the securing screws for the decoration

panels (one each), pull them forward in the direction of

the arrowand remove them. (Refer to Fig. 3)

• Remove the securing screws for the protection net.

(Refer to Fig. 3)

• Raise one side of the protection net upwardin the direc-

tion of the arrow (i) and remove back toward the arrow

(ii). (Refer to Fig. 4, 5)Take out the accessories.

(3-3) Remove the rear metal plate for transmission wire,

remote controller wire and refrigerant pipe.

• It is necessary to drill the knock out hole in the remov-

able part. Knock down several times with a punch and

hammer and remove the removable part with pliers.

• When setting the refrigerant pipe to the rear side,

remove the securing screws and the metal plate. (Refer

to Fig. 6)

(3-4) Remove the hanger brackets.

• Loosen the 2 bolts (M8) used to attach the hanger

brackets which are on each side (4 places left and right)

to within 3/8 in.. (Refer to Fig. 7, 8)

• After removing the securing screws (M5) for the hanger

brackets on the rear side, pull the hanger brackets back

in the direction of the arrow, and remove them. (Refer

to Fig. 8)

•

(4) Attach the suspension bolts. Use suspension bolts

which are W3/8 or M8-M10 in size.

• Adjust the distance of the suspension bolts from the ceiling

in advance. (Refer to Fig. 9)

NOTE

• Use a hole-in anchor for existing ceilings, and a sunken

insert, sunken anchor or other field supplied parts for new

ceilings to reinforce the ceiling to bear the weight of the

unit. Adjust clearance from the ceiling before proceeding

further.

Decoration panel

securing screw

(M4)

Decoration panel

Fig. 3

Protection net

securing screws (M4)

Decoration

panel

Decoration panel

securing screws (M4)

Decoration panel

Decoration

panel

Accessories

Fig. 4

Fig. 5

Protection net

(ii)

(i)

(ii)

(i)

Hook

Protection net

If it raises too much,

a hook stops catching

and falling out.

Removable part

(metal plate)

If setting the refrigerant pipe to

the rear side, remove this metal plate.

After removing, attach the resin bush

(Refer to Fig. 26)

Metal plate

securing

screw (M4)

Fig. 6

If setting the drain pipe to the

right side, block up the hole for

drain pipe with pate etc.

Indoor unit

Hanger bracket

3/8 or less

Length of loosening

should be less than 3/8

(Length : in.)

Fig. 7

Hanger bracket

fixing screw (M5)

Hanger bracket

setting bolt (M8)

Fig. 8

Ceiling slab

Anchor

Suspension bolt

False ceiling

1–2 3/16

(Length : in.)

All the above parts are field supplied.

Fig. 9

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 35 36

Kommentare zu diesen Handbüchern

Keine Kommentare

Daikin FXHQ-A Spezifikationen Seite 22

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Split-System-Klimaanlagen Daikin FXHQ-A